Your car’s tank is dying and you missed the only gas station on the road. You w...
One of the mediums for a Brand to stand out or catch someone’s attention is thr...
LSI Exterior LED Area Light: XLCM Lighting Fixture Documentation
The XCLM LED Area Light Fixture delivers an ultra high efficacy of up to 119 Lm/W, produces one of the industry's highest lumens at over 30,000, and has a huge distribution of light via LSI's LED optics configuration.
If you have high poles, have multiple light heads on each pole, and need to cover a large area of land, The new XLCM is the right area light fixture for you.
SMARTTEC™ - LSI drivers feature integral sensor which reduces drive current, when ambient temperatures exceed rated temperature.
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location. See LSI web site for specific guidance.
LEDS - Select high-brightness LEDs in Cool White (5000°K nominal), or Neutral White (4000°K nominal) color temperature, 70 CRI (nominal) .
DISTRIBUTION/PERFORMANCE - Types FT and 5. Exceptional uniformity creates bright environment at lower light levels.
HOUSING - One-piece, die-formed aluminum housing contains factory prewired driver. Wiring access door (with safety lanyard) located underneath.
OPTICAL UNIT - Clear tempered at glass lens permanently sealed to weather-tight aluminum optic frame (includes pressure-stabilizing breather). Optic frame recessed into housing cavity and sealed to the housing with one-piece EPDM gasket.
MOUNTING - Tapered rear design allows fixtures to be mounted in 90° and 120° configurations without the need for extension arms. Use with 3” reduced drilling pattern. A round pole plate is required for mounting to round poles. Wall mount available by ordering wall mounting bracket (BKS-XBO-WM-*-CLR). See Accessory Ordering Information chart for all brackets.
ELECTRICAL- Two-stage surge protection (including separate surge protection built into electronic driver) meets Location Category C Low. Available with universal voltage power supply 120-277 VAC (50/60Hz input), and 347-480 VAC. Optional button-type photocells (PCI) are available in 120, 208, 240, 277 or 347 volt (supply voltage must be specified).
DRIVER - Available in SS (Super Saver) and HO (High Output) drive currents. Components are fully encased in potting material for moisture resistance. Driver complies with FCC standards. Driver and key electronic components can easily be accessed.
OPERATING TEMPERATURE - -40°C to +50°C (-40°F to +122°F)
FINISH - Fixtures are finished with LSI’s DuraGrip polyester powder coat finishing process. The DuraGrip finish withstands extreme weather changes without cracking or peeling. Available in black, bronze and white. Other standard LSI finishes available. Consult factory.
WARRANTY - LSI LED fixtures carry a limited 5-year warranty .
PHOTOMETRICS - Please visit LSI's web site at www.lsi-industries.com for detailed photometric data.
SHIPPING WEIGHT (in carton) - One fixture: 25.25 lbs. (11.5 kg). Packed two per carton: 43.5 lbs. (19.7 kg).
LISTING - UL listed to U.S. and international safety standards. Suitable for wet locations. This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.
|LED Light Type||LED Area Pole Lights|
|System Efficacy (Lm/W)||99|
|LED L70 Lifetime (hrs)||151,000 - 239,000|
|CRI (Color Accuracy)||80|
|Operating Temperature (°C)||-40°C to 50°C|
|Certification||UL Listed USA and Canada File #: E338791, LM-79 available, IP-65, IP-67, ROHS Compliant, DLC Listed|
|Watt Replacement||1000W Replacement|